For any concrete that measures 5 to 6 inches in depth, you will need reinforcing mesh. The intended use and the type of concrete will impact the requirement for reinforcing mesh. As to why it needs to have a specific thickness for best results, your reinforcing mesh must be placed at the center of or slightly above the center of the concrete slab. Experts at Reozone Steel Reinforcement, St. Marys, will be happy to give you recommendations when you contact them for your reinforcing mesh needs.

The term used to define supports placed beneath reinforcing mesh grids to prop them up is “chairs.” The rebar grids have equal spacing while placed upright. Professionals use metal wire to fasten together bars together at every intersection. As the edges need to be equally spaced from all sides of the slab, it is vital to adhere to minimum concrete coverage throughout the piece. St Marys NSW can be seen here.

Deformed Bars

Most reinforcing mesh is equipped with heavy ridges called deformed bars. This will help bind the reinforcing mesh at the point of these ridges. There are regulations for bump heights and spacing, even though there are no regulations on deformed bar patterns. Experts at Reozone Steel Reinforcement, St. Marys, apply plain bars when the reinforcement steel need slides, including segmented bridges or highway pavements, deformed bars are mandated in many situations. Click here to read about How Effective Are Reinforcement Systems.

View in a full screen map